01 / Regime
Torntle
) continuous, intermittent, as demand for line pressure.
Home / Divisions/ Compressed air
Division ยท Compressor / Air
) high-pressure , ventilation screw piston p14, packages 5-15 HP, RF dryers and banks . Each model with technical information sheet America (60 Hz) and Europe (50 Hz) - guiding values for preliminary projects.
Technical criterion
The correct series prevents overdimensioning the engine and end pressure drops. AM / EU change Hz and tension and selection logic is the same.
01 / Regime
) continuous, intermittent, as demand for line pressure.
02 / Quality
RF and filtration by area according to paint, blow or tool.
03 / demand
Varier or two cascades with an irregular profile.
04 / Red
Proper ร ring reduces ฮP and p19 โณ close to place.
05 / Market
60 Hz / 220-480 V AM vs. 50 Hz / 400 V EU - sheets per model below.
Divisional families
), , and ppppg packages. Each family opens its variants.
Compressor) for blowing, testing and demand high pressure at plant.
Loan screw for continuous rolling: p13, 7, 11 / 15 / 22 kW and VSD.
Tank piston for intermittent demand of workshop and lab oil-less.
Fountain + tank + p19 โณ + dryer as per pack for quick mounting.
Series and models
Each card includes technical information sheet America and Europe (guidance). No repeated photos on this page.
ACG-30
high pressure) for blow and test.
Guidance values. The final tension depends on the place.
Guidance values. The final tension depends on the place.
ACG-40
been built up with an associated drying bar.
High pressure: check local network ร and safety valves.
High pressure: check local network ร and safety valves.
ACS-7
Torntle) 7 workshop with soundproof cabin.
Ideal bay 2-4 jobs with p19 been per area.
Ideal bay 2-4 jobs with p19 been per area.
ACS-11
Tornillo 11 kW for several bay network.
Dimension by simultaneous tools.
Dimension by simultaneous tools.
ACS-15
Speed variable as required all
VSD: confirm local harmonies and cabling.
VSD: confirm local harmonies and cabling.
ACS-22
Ground screw with cold dryer.
Machine room: ventilation and drainage of condensates.
Machine room: ventilation and drainage of condensates.
PCT-270
Stamp and tank 270 L for intermittent demand.
Workshop with peaks and does not replace continuous screw.
Workshop with peaks and does not replace continuous screw.
Check anchor and wall distance for cooling.
Check anchor and wall distance for cooling.
PCT-OIL
No oil for labs and fine paint.
Ground oil: ideal water cabin and lab.
Ground oil: ideal water cabin and lab.
HP-5
Key in hand 5 HP + tank and).
Promotional pack and an optional dryer with quality.
Promotional pack and an optional dryer with quality.
HP-7
7.5 HP with dryer and line filters.
A good cost / capacity balance for light body.
A good cost / capacity balance for light body.
HP-10
10 HP for medium workshop.
Confirm machine / tool simultaneity factor.
Confirm machine / tool simultaneity factor.
HP-15
The light and high and Rheand with a Red with a Rast.
Ring reduces sympsis and tipstick.
Ring reduces sympsis and tipstick.
DRY-RF
Section 3
It's not ISO certification and final class is valid in project.
It's not ISO certification and final class is valid in project.
FRL-BANK
Filtering / regulating / lubrication by area.
AM shows bar and pSI; EU prioritizes bar.
AM shows bar and pSI; EU prioritizes bar.
AIR-EU
Configure type of EU / DE compressor room.
Section reference DE / AT; adapt to local regulations.
Section reference DE / AT; adapt to local regulations.
Application scenarios
Flow and bar guidance - closed as a proposal with local data.
Scenario A
Reg.
Scenario B
) 15 VSD + 30 for blow.
Scenario C
nationals)
Contact
We have dimensions and treatment. Orientation values AM (60 Hz) / EU (50 Hz).
, 8010), Austria